An green material with excellent weight to strength ratio, paper honeycomb core panels can be a popular material across the world for its use within packaging, doors, table tops, panels, automobiles and a lot more. Being on the inside means it can be almost never visible to end users rendering it the invisible force within a lightweight eco-friendly panel!
paper honeycomb core panels are produced by gluing sheets of board to paper honeycomb from bottom and from top. We make paper honeycomb core panels using the following technical factors:
- length – up to 2500mm;
- width – from 10mm to 800mm;
- height – from 10mm to whatever is necessary;
- cell size – 14mm, 21mm and 27mm.
For paper honeycomb core panels manufacturing we use our very own paper honeycomb and recycled board 300gsm.
Where and ways in which paper honeycomb core panels are being used
There are large number of methods how to use . The amount of fields where this product may be applied is fast growing.
Firstly: paper honeycomb core panels may be used as fillers for inner doors or for furniture production. The benefits of this material over the analogues are: smaller weight, absence of waste, eco-friendliness, good heat and noise insulation characteristics. Still, a ready-made home furnishings is strong and sturdy enough. We are able to offer standard paper honeycomb core panels right out the manufacturing facility. These paper honeycomb core panels are ideally fitted for door production and are sized 2000x800x33mm.
Secondly: paper honeycomb core panels are frequently used in numerouspackaging decisions. paper honeycomb core panels are used as fillings when transporting goods. paper honeycomb core panels are actively pushing out other substitute materials in this market due to their outstanding characteristics of strength and eco-friendliness. For example, the flagship of World’s furniture industry – IKEA, is switching to honeycomb panels for their products’ packing needs.
paper honeycomb core panels structure
Man-made honeycomb structural materials are commonly made by layering a honeycomb material between two thin layers that provide strength in tension. This forms a plate-like assembly. Honeycomb materials are widely used where flat or slightly curved surfaces are needed and their high strength-to-weight ratio is valuable. They are widely used in the aerospace industry for this reason, and honeycomb materials in aluminum, fibreglass and advanced composite materials have been featured in aircraft and rockets since the 1950s. They can also be found in many other fields, from packaging materials in the form of paper-based honeycomb cardboard, to sporting goods like skis and snowboards..