An green material with excellent weight to strength ratio, honeycomb panels for furniture is really a popular material across the globe for the use within packaging, doors, table tops, panels, automobiles and a lot more. Being inside means it is almost never visible to end users making it the invisible force within a lightweight eco-friendly panel!
honeycomb panels for furniture are made by gluing sheets of board to paper honeycomb from bottom and from top. We make honeycomb panels for furniture using the following technical factors:
- length – up to 2500mm;
- width – from 10mm to 800mm;
- height – from 10mm to whatever should be used;
- cell size – 14mm, 21mm and 27mm.
For honeycomb panels for furniture development we use our very own paper honeycomb and recycled board 300gsm.
Where and in what ways honeycomb panels for furniture are used
You will find large number of methods the way you use . The amount of fields where these components may be applied is fast growing.
Firstly: honeycomb panels for furniture may be used as fillers for inner doors or for furniture production. The advantages of this material over the analogues are: smaller weight, absence of waste, eco-friendliness, good heat and noise insulation characteristics. Still, a ready-made furniture pieces is strong and sturdy enough. We can offer standard honeycomb panels for furniture straight from the warehouse. These honeycomb panels for furniture are ideally fitted for door production and are sized 2000x800x33mm.
Secondly: honeycomb panels for furniture are traditionally used in numerouspackaging decisions. honeycomb panels for furniture are used as fillings when transporting goods. honeycomb panels for furniture are actively pushing out other substitute materials in this market due to their outstanding characteristics of strength and eco-friendliness. For example, the flagship of World’s furniture industry – IKEA, is switching to honeycomb panels for their products’ packing needs.
honeycomb panels for furniture structure
Man-made honeycomb structural materials are commonly made by layering a honeycomb material between two thin layers that provide strength in tension. This forms a plate-like assembly. Honeycomb materials are widely used where flat or slightly curved surfaces are needed and their high strength-to-weight ratio is valuable. They are widely used in the aerospace industry for this reason, and honeycomb materials in aluminum, fibreglass and advanced composite materials have been featured in aircraft and rockets since the 1950s. They can also be found in many other fields, from packaging materials in the form of paper-based honeycomb cardboard, to sporting goods like skis and snowboards..